Follow us on Youtube SUBSCRIBE

Change eMMC Only Redmi 6 Pro Sakura Without Box | MiUi V12.0.4.0 | Fix Dual IMEI | Ganti eMMC Tanpa UFI Box

Assalamualaikum warahmatullahi wabarakatuh, hello friends. This time i want to share about Change eMMC Only Redmi 6 Pro Sakura Without BOX like UFI Box, just via Unlocktool.


To get the Unlock Tool you can download from the official website, at https://unlocktool.net/download and contact us to activate it, at https://t.me/mobilecareid INDONESIA and other Country.

First, take eMMC (RPMB clean) by supported eMMC ids below and pair eMMC on the board.

Supported eMMC :
 EMMC [Samsung] QX13MB
 EMMC [Samsung] GE6BMB
 EMMC [Samsung] GX6BMB
 EMMC [Samsung] QD63MB
 EMMC [Samsung] GD6BMB
 EMMC [Samsung] RE1BMB
 EMMC [Samsung] RX1BMB
 EMMC [Samsung] RH64AB
 EMMC [Samsung] RP64MB
 EMMC [SK Hynix] FTAC
 EMMC [SK Hynix] FTMC
 EMMC [SK Hynix] LTMC
 EMMC [SK Hynix] HBG4a2

Download file in the link below and 'Extract here' using winrar or 7-Zip software.
Download file in the link below and 'Extract here' using winrar or 7-Zip software, then copy and paste 'images' folder to 'sakura_india_global_images_V12.0.4.0.PDMMIXM_20201104_9.0_global/paste here/images' and click 'replace all' and then flash it.
After flash, if your device stuck recovery 'This MIUI version can't be installed on this device' or 'NV data is corrupted'. To fix it, change the resistor to 15k resistor green marked as shown below.


Turn on your device into menu, if it's still stuck recovery then restart. Connect your device to computer and activate diag mode by access *#*#717717#*#* now your device is into diag mode.

Download QPST/QFIL Tool in the link below and open it.
Now, download QCN file in the link below (choose one file/try other qcn) and restore QCN via QFIL Tool.
Then, if you want to write dual IMEI, you can change dual IMEI via Unlocktool or UFI Box according your country by diag mode.

After restore QCN and write dual IMEI the signal of your device will be lost or emergency call or no services, to fix it download file in the link below and flash it by 'edl/9008' (test point) mode.
Turn on your device, all done.

Posting Komentar